CS03 2

How To Measure A Trampoline

Table of content

  • Introduction of How To Measure A Trampoline
  • Measuring Trampoline Sizes
  • How To Measure Trampoline Mats
  • Counting the rings
  • Trampoline Spring Size Measurement
  • Conclusion of How To Measure A Trampoline


How To Measure A Trampoline? Do you have a trampoline in your backyard? If so, do you know how to measure it for safety? In this blog post, we’ll show you how to measure your trampoline for both the jumping surface and the frame. This is important information to have, especially if you’re looking to buy a new trampoline or are thinking about having one installed. So, keep reading for all the details and learn how to measure a trampoline.

Measuring Trampoline Sizes

The dimensions of the trampoline vary from frame to frame: Not due to bouncing materials. These are the dimensions of a trampoline and are usually listed on an order form. These sizes are generally standard and not random. You need to know what to expect. You should at least be able to tell a bad measure from a good one.

How To Measure A Trampoline? This is how you can get the best measurements for every size and design style.

Round Trampoline Measurements

Use a tape measure to measure your trampoline. Think of it like a clock. Take the first measurement between 12 and 6 hours. Make sure you start and end at the edge of your frame, not at the mat or trampoline springs.

Make sure the tape measure is as close to the center of the trampoline as possible.

Keep track of the measurement, then start again. This time measure for 3 to 9 hours. If we continue to use our clock analogy, you need to make sure that your tape measure goes through the center of the trampoline and covers the entire length of the trampoline.

Take these measurements and add them up.

Then divide by 2. This will give you an average trampoline diameter.

At the end of the line

The most common round trampolines should be between 10m and 4.9m in size, with each size limited to 0.6m increments. 3.0 m. 3.7 m. 4.

3 meters and 4.9 meters. Try measuring again if you don’t get a measurement that matches one of these lengths. Note: If your first and second measurements are different (for example, you need to repeat the measurement if your first and second measurements are different (for example, 2.9m for the first time, 3.2m for the second).

Rectangular sizes

In addition, rectangular trampolines can be measured from frame to frame.

Measure from one end of the side frame, then measures to the other side. Do not measure the springs or the carpet alone. Be sure to measure the entire frame.

You will now have your measurements.

For example, 2.4m (width x 4.3m) or 3.0m (width x 5.2m)

You don’t need to repeat the measurement with rectangular trampolines as it’s much easier to measure from frame to frame.

When measuring your yard or backyard space to plan the size of your trampoline order, be sure to leave enough space.

The first is that the space required to install the trampoline may be larger than its actual size. It is not a good idea for your trampoline to be enclosed or near other objects such as trees, rocks, or other hazards. To make it easier to install your trampoline in your garden, add a few feet between the desired trampoline dimensions.

How To Measure Trampoline Mats

Tearing your trampoline mat can cause serious damage, but that doesn’t necessarily mean you need to replace it. It is easy and inexpensive to replace trampoline mats.

Accurately measuring your trampoline mat is crucial in order to find the best replacement. Here are the three steps to measuring your trampoline mat for replacement mats.

The total size of your frame (as determined previously for the size of the trampoline).

The total number of rings v;

The size of the trampoline spring.

Counting the rings

V-rings allow you to attach springs to your trampoline mat. You can replace an old trampoline mat by counting the number of V-rings and using that number. It’s easy to lose track of where you are when you count. It is easy to mark the point where you want to start counting using a coin or a marker.

If your trampoline does not have a mat, count the number of holes in the top rails of the trampoline. These are the places where the springs attach to your trampoline mat. They should line up exactly with the number of V-rings on your mat.

Another great resource for measuring is this one.

Trampoline Spring Size Measurement

Make sure not to attach your trampoline springs to the trampoline when measuring the size of the trampoline spring. They must be clear of the frame of the trampoline and must not be extended or kept under tension. Next, measure the length of the spring from the hook.


How To Measure A Trampoline? It is important to measure your trampoline accurately. It’s usually easier, faster and more cost-effective in the long run when you order from a trusted manufacturer like Relife

With our Relife products designed for safety by professionals with decades of experience – not just one person at an online retailer who has never even seen these things up close–you’ll be able to replace parts every time instead if them needing replacement often!

2021 California Black Friday | RelifeSport Home Fitness Equipment Recommendations
How to measure trampoline springs

Leave a Reply

Your email address will not be published.

Close My Cart
Close Wishlist
Recently Viewed Close